Free NetApp Certified Implementation Engineer – SAN, ONTAP Exam NS0-520 Exam Practice Test

An administrator is asked to configure NVMe on an ONTAP 9.5 cluster for host access.Which three steps must the administrator perform to accomplish this task? (Choose three.)

• Create a namespace.
  
• Provision a subsystem.
  
• Configure the FC port.
  
• Gather the IQN from the host initiator software.
  
• Gather the NQN from the host system.
  

An administrator enabled the FCP protocol on an SVM and created a boot LUN for a Windows Server 2019 server host. The host is attached using multiple paths to the storage SVM. After correctly addingthe LUN to the igroup and setting its LUN ID to 1, the host is unable to boot using the installed FC HBA.

• The LUN ID must be set to 0
  
• The LUN ID must be set to 255
  
• During the boot process, using FCP is not supported by Netapp
  
• During the boot process, using FCP is not supported by Microsoft
  

You have a 100GB volume with the space guarantee set to volume, This volume contains two space reserved 20 GB LUNs. Both LUNs are at 50% use. You then create a snapshot copy of the volume. Nomodifications were performed since the snapshot copy was completed, and all actions were performed using the CLI. In this scenario, how much free space does the volume have?

• 60 GB
  
• 20 GB
  
• 40 GB
  
• 80 GB
  

Which two components must be verified for a supported NetApp SAN confutation? (Choose two.)

• host memory
  
• host GPU
  
• host multipath
  
• host bus adapter
  

An administrator needs to connect a new VMware 6.5 cluster to an ONTAP cluster for iSCSl connectivity. Which two steps would accomplish this task? (Choose two.)

• Enable iSCSl adapters on the ESXi hosts.
  
• Install the Virtual Storage Console for VMware vSphere.
  
• Configure zoning for the HBAs and the ONTAP data LIFs.
  
• Configure ALUA on the ONTAP SVM.
  

You need to move a LUN non-disruptively from an AFF A200 HA pair to an AFF A700 HA pair within the same 4-node cluster using the steps shown below.1. Scan the host OS to discover all paths to the LUN.2. Execute the lun move command to move the LUN to the AFF A/00 HA pair.3. Remove the AFF A200 HA pair from the reporting-nodes list.4. Add the AFF A700 HA pair to the reporting-nodes list.What is the correct sequence in performing, these steps?

• 1, 2, 3. 4
  
• 4. 1, 2, 3
  
• 4, 3. 2. 1
  
• 3, 2, 1,4
  

You are troubleshooting high CPU use on a FAS8200 with all SAS HDDs. You have SAN hosts with LUNs in a volume named vol1. You want to reduce CPU use and maintain storage efficiencies.Referring to the exhibit which three actions will accomplish this task? (Choose three.)

• Disable compression.
  
• Enable cross-volume deduplication.
  
• Disable inline deduplication.
  
• Enable post process deduplication.
  
• Enable data compaction.
  

Which row of items should you look up in the IMT (Interoperability Matrix Tool) when designing a NetApp Storage Solution for a customer?

• Host OS & patches, FC WWPN, Volume Manager, File System version
  
• Host OS, iSCSI IQN, Volume Manager, Clustering
  
• Host OS & patches, HBA driver, Volume Manager, File System, Clustering
  
• Host OS, HBA driver, Host Memory & CPU Speed, File System, Clustering
  

At which storage object level is deduplication enabled?

• Aggregate
  
• Volume
  
• Qtree
  
• LUN
  

You create a new iSCSI SVM and secure iSCSI sessions by using both Challenge-Handshake Authentication Protocol (CHAP) and iSCSI Access Control Lists (ACL).In this scenario, in which two ways are you securing your iSCSI implementation? (Choose two.)

• CHAP creates a hash value for the username and shared secret.
  
• iSCSI ACLs are applied to the initiator configuration to provide an IP address of the targets.
  
• CHAP encrypts all iSCSI session I/O.
  
• iSCSI ACLs are applied to the target configuration to provide an IP address of the initiators.