Free NetApp Certified Implementation Engineer – SAN Specialist, E-Series Exam NS0-516 Exam Practice Test

Your company has deployed an E2824 and has decided to change the host protocol from iSCSI to FC. You use the storage array profile to review the installed SFPs.In this scenario, which set of supported data rates indicates that you are using dual-purpose SFPs?

• 25 Gbps, 10 Gbps
• 32 Gbps, 16 Gbps, 8 Gbps, 4 Gbps
• 16 Gbps, 10 Gbps, 8 Gbps, 4 Gbps
• 16 Gbps, 8 Gbps, 4 Gbps

You are adding drives to an existing Dynamic Disk Pool (DDP).In this scenario, which two drive characteristics should you consider when selecting the drives? (Choose two.)

• if the drives are the same capacity or larger
• if the drives have a compatible security type
• if the drives are from the same manufacturer
• if the drives have the same firmware level

A customer has an E5760 array with a 30-drive Dynamic Disk Pool (DDP) that uses 800 GB SSD drives. The customer needs to expand the pool by one drive but has only a 1.6 TB SSD drive available.In this scenario, what happens when the customer attempts to add the 1.6 TB drive to the existing pool?

• The pool is expanded by 1.6 TB
• The pool is expanded by 1.6 TiB
• The pool is expanded by 800 GB
• An error occurs, and the add fails

You want to find detailed information about the devices that are connected to the Brocade switch. In this scenario, which command would accomplish this goal?

• portloginshow
• zoneshow
• nsshow
• switchshow

Which command collects detailed diagnostic information from a Brocade FC switch?

• supportshow
• showsupport
• diagshow
• showdiag

Which three documents should be provided to the customer after the E-Series installation is complete? (Choose three.)

• a document showing how much space is available for system expansion
• a document showing the cabinet layout with cabling information and IP addresses being used
• a document showing user IDs and passwords for all deployed devices
• a document with IMT pages that show the supported host configuration and fabric switches in the solution
• a document showing available power on the UPS with no equipment connected

An administrator is asked to provision a 1 TB volume to hold non-critical temporary data for a seismic-analysis application. The volume requires the highest possible IOPS.In this scenario, which configuration would satisfy this requirement?

• RAID 6 Dynamic Disk Pool with a 256 KiB segment size
• RAID 5 volume group with a 256 KiB segment size
• RAID 0 volume group with a 32 KiB segment size
• RAID 6 Dynamic Disk Pool with a 32 KiB segment size

A junior administrator recently made changes to an E-Series system. As a result of these changes, the management host lost the ability to manage the E-Series system through in-band management, but the host still has access to the E-Series data volumes.In this scenario, what caused this issue?

• The access volume was un-mapped
• The management IPs were changed
• The ownership of the management host’s volumes changed
• Auto Load Balancing was disabled

What is the minimum number of drives needed to create a Dynamic Disk Pool?

• 12
• 8
• 3
• 11

Which two local users of NetApp SANtricity Unified Manager would be used to edit the Certificate Management section? (Choose two.)

• storage
• support
• security
• admin