Free Nutanix Certified Professional – Multicloud Infrastructure v6.5 Exam NCP-MCI Exam Practice Test

An administrator has a Custom backup application that requires a 2TB disk and runs m Windows. Throughput is considerably lower than expected.The application was installed on a VM with the following configuration:FOU vCPUs with one core/vCPU4GB of MemoryOne 50GB vDisk for the Windows installationOne 2TB vDisk for the applicationWhat is the recommended configuration change to improve throughput?

• Add 4GB of memory to the VM
• Increase the vCPUs assigned to the VM
• Span the 2TB disk across four vDisks
• Increase the number of cores per vCPU

An administrator needs to increase bandwidth available to the AHV host and to the CVM. How should the administrator complete this task?

• In Prism, update vs0 to change the configuration to Active-Active.
• Use manage-ovs commands to update br0 change the configuration to Active-Active.
• In Prism, create a vsl interface and add any remaining uplinks.
• Use manage-ovs commands to create br1 and add any remaining uplinks

An administrator wants to create a trunked interface on a VM on AOS 5.15x. Which two steps should the administrator take first to achieve this? (Choose two)

• Use acli
• Log in over PE web UI.
• SSH to CVM.
• Update VM dialog.

A cluster has RF2. The cluster loses two drives on different nodes in the same storage tier. What is the effect on the replicas of the VMs?

• Some VM data may be lost
• No VMs lose data if the node has two or more SSDs
• Some VMs may reboot and gain access to data
• No VMs lose data because of RF2

An administrator initially performed a cluster Foundation using a flat switch without any VLAN configuration. After the Foundation, the administrator moved the dual 25Gb data ports and single 1Gb IPMI port to the actual switches with the below network configurations:. All VLANs are tagged. VLAN 1000 for CVM\Hypervisor traffic· VLAN 1001 for User VM traffic. VLAN 100 for IPMI trafficAfter moving the IPMI network links, the administrator can no longer ping the IPMI IPs. Which two changes does the administrator need to make? (Choose two.)

• SSH to AHV and set the VLAN ID using IPMI Tool.
• SSH to CVM and restart network services on all host.
• SSH to AHV and change the IP address using IPMI tool.
• SSH to CVM and restart Genesis on all CVMs.

Which component can be associated with a storage policy?

• Subnet
• Catalog
• Vm
• Category

An administrator is performing validation testing of a new-deploy cluster. During this test, the administrator disconnect each LAN interface from each of the nodes while pinging the hypervisor and guest VMs.When the first interface is disconnected, pings continue as expected to the hypervisor, but pings stop responding from the guest. Pings continue when the interface is reconnected. When the second interface is disconnected, pings continue to both the hypervisor and guest VMs.What could be the cause of this error?

• This is normal behavior for a LAN Failover
• Switch ports are configured with different VLANs
• Portfast is not enabled on the switch ports
• One of the network interfaces has a bad patch cable.

When a configuring a syslog server in Prism Central, what two pieces information are required? (Choose two.)

• HTTPS URL
• Encryption secret
• Transport protocol
• IP address/port

An administrator has an AHV cluster that is comprised of 4 nodes with the following configuration in each node:CPU:2 each 2.4GHz, 12 core Memory: 256GBDisk: 6 each 1.92 SSDA VM with 16 vCPUs and 96GB of RAM is being created on the cluster.How should the administrator configure the VM to assure optimal performance?

• With an affinity policy
• With memory overcommit
• With 2 vNUMA nodes
• With Flash Mode enabled

An administrator is preparing to deploy a new application on an AHV cluster, Security requirements dictate that all virtual servers supporting this application must be prevented from communicating with unauthorized hosts.Which option would achieve this goal?

• Create a new VLAN, create a subnet on the cluster with the VLAN tag, deploy servers with vNlCs in the new subnet.
• Create a new Application Security Policy restricting communication to the authorized hosts and apply it to the servers in enforce mode.
• Create a new solation Environment policy apply it to the new servers and all authorized hosts.
• Create new' subnet and assign to an existing VPC assign the IP prefix and gateway for the subnet, deploy servers with vNlC5 in the new subnet.