Free Aruba Certified Campus Access Associate Exam HPE6-A85 Exam Practice Test

You are in a meeting with a customer where you are asked to explain the network redundancy feature Multiple Spanning Tree (MSTP). What is the correct statement for this feature?

• MSTP configuration ID revision by default as current MSTP root priority
• MSTP configuration ID name by default using switch IMC address
• MSTP configuration ID name by default using switch serial number
• MSTP configuration ID revision by default as switch serial number

What is an advantage of using Layer 2 MAC authentication?

• MAC allow lists are easily maintained over time.
• No setup is required on the client.
• It matches user names to MAC address.
• MAC identifiers are hard to spoof.

Where are wireless client roaming decisions made?

• Client device
• Virtual Controller
• Joint decision made by the origination and destination APs
• Aruba Central

A client connects to an Aruba AP in tunnel mode and is assigned to a VLAN based on the client's MAC address.Which client VLAN assignment was configured?

• Mixed
• Static
• Native VLAN
• Dynamic

You need to configure wireless access for several classes of loT devices, some of which operate only with 802 11b. Each class must have a unique PSK and will require a different security policy applied as a role There will be 15-20 different classes of devices and performance should be optimized Which option fulfills these requirements''

• Single SSID with MPSK for each loT class using 5 GHz and 6 GHz bands
• Single SSID with MPSK for each loT class using 2.4GHz and 5 GHz bands
• Individual SSIDs with unique PSK for each loT class, using 5GHz and 6 GHz bands
• Individual SSIDs with unique PSK for each loT class, using 2.4GHZ and 5GHz band

What information is required when using the ClearPass self-service registration page to generate a Multiple Pre-Shared Key (MPSK) for headless devices?

• The device's model number
• The device's MAC address
• The device's IP address
• The device's OS type

You have been asked to onboard a new Aruba 6300M in a customer deployment You are working remotely rather than on-site You have a colleague installing the switch The colleague has provided you with a remote console session to configure the edge switch You have been asked to configure a link aggregation going back to the cores using interfaces 1/1/51 and 1/1/52 The Senior Engineer of the project has asked you to configure the switch and 1Q uplink with these guidelines

• Add VLAN 20 to the local VLAN database with name Mgmt
• Add L3 SVl on VLAN 20 for Management using address 10 in the 10.1.1 0/24 subnet 3. Add LAG 1 using LACP mode active for the uplink
• 4 use vlan 20 as the native vlan on the LAG 5. Make sure the interfaces are all ON. Which configuration script will achieve the task?
• Edge1# conf t vlan 20 name Mgmt interface vlan 20 ip address 10.1.1.10/24 no shut interface lag 1 shut vlan access 20 lacp mode active Int 1/1/51.1/1/52 shut no routing lag 1 interface lag 1 no shut
• Edgel# conf t vlan 20 name Mgmt interface vlan 20 ip address 10 1.1 10/24 no shut interface 1/1/51.1/1/52 shut vlan trunk native 20 vlan trunk allowed all lag 1 lacpmode active interface 1/1/51.1/1/52 no shut
• Edgel# conf t vlan 20 name Mgmt interface vlan 20 ip address 10 1 1 10/24 no shut interface lag 1 shut vlan trunk native 20 vlan trunk allowed all lacp mode active Int 1/1/51.1/1/52 shut no routing lag 1 interface lag 1 no shut interface 1/1/51.1/1/52 no shut
• conf t vlan 20 name Mgmt ip address 10 1 1.10/24 no shut interface lag 1 shut vlan trunk native 1 vlan trunk allowed all lacp mode active int 1/1/51.1/1/52 shut no routing interface lag 1 no shut interface 1/1/51.1/1/52 no shut

What does WPA3-Personal use as the source to generate a different Pairwise Master Key (PMK) each time a station connects to the wireless network?

• Session-specific information (MACs and nonces)
• Opportunistic Wireless Encryption (OWE)
• Simultaneous Authentication of Equals (SAE)
• Key Encryption Key (KEK)

A hospital uses a lot of mobile equipment for the diagnosis and documentation of patient data What Is the ideal access switch for this large hospital with distribution racks of over 400 ports in a single VSF stack?

• CX 6300
• OCX 6400
• OCX 6200
• OCX 6100

You have physical access to an Aruba CX-Switch with unknown/lost credentials. What are the possible steps to rebuild the credentials? (Select two.)

• Connect the switch via the console. Then, power cycle the switch.
• Press and hold the clear button. Then, power-cycle the switch.
• Press and hold the clear button. Then, press the reset button for 2 seconds and release both buttons.
• Call Aruba support for a one-time password.
• Use boot profile 0.