Free HPE Compute Solutions Exam HPE0-S59 Exam Practice Test

Which statement about the HPE D3940 storage module is true?

• SATA drives requires redundant 10 adapters to be installed in this module
• Up to five modules can be installed in a single frame with Gen10 servers
• it is configured through CLl available from HPE Synergy console
• Only one type of drives (SATA, SAS, SSD) can be installed in each module

Your customer has an HPE Synergy platform deployed and managed using HPE OneView. The customer also has HPE Superdome Flex with RMC deployed They plan to deploy a second nPar and HPE Superdome Flex 280 They plan to manage new components using HPE OneViewWhat must be done to achieve this goal?

• The customer must use IL05 to add HPE Superdome Flex systems to HPE OneView
• The customer should deploy an HPE OneView appliance for HPE Superdome Flex management
• The customer must add a second Rack Management Controller for HPE Superdome Flex 280
• The customer has to add HPE Superdome Flex to the HPE OneView used to manage HPE Synergy

In the past a customer experienced a networking issue where network ports went down and came back up in quick succession.Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?

• Pause flood protection
• sFlow
• Storm control
• Port flap protection

Which statement about an HPE Oneview support dump is true?

• Appliance support dump by default contains a logical enclosure support dump
• Support dump is a binary file that can be opened only in a dedicated application
• Support dump can be created if HPE Virtual Connect modules are installed in the frame
• Preview support dump is available only when creating an appliance support dump

Your customer plans to use HPE Primera to boot HPE Synergy compute nodes. They currently have two HPE Virtual Connect SE 100Gb F32 Module for Synergy modules installed in the frame. The customer wants to use FC as a storage access protocolWhat must be done to complete this task?

• Enable FC primary and secondary boot on the modules through the HPE OneView interface
• FC connectivity on the modules should be enabled through the service console by disabling FCoE.
• Add FC upgrade licenses in HPE OneView that will enable FC connectivity for the modules
• Enter both modules into a maintenance mode, then enable FC connectivity through CLI

Your customer wants to add a second HPE Synergy frame to an existing logical enclosure Based on a single HPE Synergy frame. The customer wants to use a highly available master setup.Which procedures should De performed during the expansion process? (Select two.)

• Create a new logical interconnect group and enclosure group for two frames setup
• Create a new logical enclosure based on both HPE Synergy frames.
• Re-parent an existing enclosure group to the new logical interconnect group.
• Modify an existing logical interconnect to include second HPE Synergy frame.
• Move one of the master modules to the appropriate interconnect bay in the second frame.

You are troubleshooting an HPE OneView server profile that presents a critical state. The server profile was configured with a Link Aggregation GroupWhat should you check to fix the issue?

• if both FiexNICs are configured with the same speed
• If the logical enclosure is built on at least three HPE Synergy frames
• if both FiexNICs are connected to different networks
• if the logical enclosure is configured with redundant master modules

Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU socketsWhich HPE compute system meets the customer requirements?

• HPE ProLiant DL580 Gen10
• HPE ProLiant OL380 Gen 10 Plus
• HPE Synergy 480 Gen10 Plus
• HPE Superdome Flex system

Your customer experienced some problems caused by outdated HPE Superdome Flex firmware.Which update method should they use to avoid these issues in the future?

• HPE OneView method for I/O firmware update procedure
• RMC CLI to update I/O and HPE Persistent Memory firmware
• HPE OneView IT HPE Persistent Memory firmware must be updated.
• HPE SUM if HPE Persistent Memory firmware must be updated

Which statement about HPE Superdome Flex 280 is true?

• It supports 2 to 8 sockets in 2-socket increments.
• it cannot be managed using HPE OneView.
• It must be equipped with at least 768 GB of memory.
• It can support up to two nPars with an external RMC.