Free HCIP-Data Center Facility Deployment V2.0 Exam H12-425_V2.0 Exam Practice Test

When the UPS5000-E works in normal mode, in which condition will the UPS automatically transfer to bypass mode?

• Mains outage occurs.
• The power module is overloaded for a period longer than the specified time.
• Power module overtemperature occurs.
• Bypass module hardware is faulty.

Due to simple operations and easy interconnection, which of the following communication types is recommended for NetEco northbound integration?

• WebService
• SNMP
• FTP
• PoE

In the FusionModule2000, the skylight actuator can control the rotating skylight in the aisle containment of the modular data center.

• True
• False

For FusionModule2000, depending on different layout position, batteries can be deployed in the smart module or out of the smart module.

• True
• False

To modify the FusionModule2000 plan view of the ECC800-Pro, users need to log in to the WebUI as admin account.

• True
• False

When the outdoor unit of a Huawei air-cooled air conditioner is installed horizontally, what is the minimum distance between the outdoor unit and the wall or obstacle?

• 100 mm
• 200 mm
• 300 mm
• 600 mm

A data center is at the Tier IV level and uses Huawei FusionModule2000 smart module. In this smart module, the PDU8000 integrated PDF cannot be used to supply power to IT loads and precision air conditioners at the same time because isolation requirements are not met.

• True
• False

Three UPS5000-E-400Ks from a 2+1 parallel system. Which of the following statements about the parallel system are true?

• The parallel system capacity displayed on the LCD is 1200 kVA.
• The networking mode is set to one-to-multiple for one UPS, and set to one-to-one for the other two UPSs.
• If the load is 420 kW, each of two UPSs carries 210 kW load, and the other one is standby and does not carry load.
• If the load is 420 kW, each of the three UPSs carries 140kW load.

In the FusionModule800 grounding solution, each cabinet is connected to the ground bar of the data center.

• True
• False

If multiple SmartLi battery cabinets are combined, press and hold the POWER ON/OFF button on each battery management module for more than 2s, and then switch on the battery circuit breaker in any cabinet to start all battery cabinets.

• True
• False