Free Pure Storage Certified FlashArray Implementation Specialist Exam FlashArray-Implementation-Specialist Exam Practice Test

Prior to running the puresetup newarray command, which command should an Installation Engineer run on a new install of an //XR4 array?

• pureboot list
• cobalt_check.py
• purehw list

The Customer’s Implementation Workbook specifies that the SMTP reply is “outlook.microsoft.com:587”. What correction should be made for array initialization to be successful?

• Provide username and password.
• Prefix the URL with “https://”.
• Remove the port number.

An Implementation Engineer is beginning a controller upgrade. Which command should be run to stop Purity?

• pureadm stop
• pureadm stop --secondary
• pureadm stop --controller CT0

A customer has a FlashArray X20R3 with 22/22 data packs in the chassis at 80% space usage and wishes to swap one of the data packs for a 45TB pack. What step needs to be taken to facilitate this consolidation?

• Send a DirectFlash Shelf without any additional capacity.
• Send a DirectFlash Shelf with a 63TB of temporary extra capacity.
• Reduce array space usage to allow for the evacuation of the 22TB packs.

When installing the first DirectFlash Shelf on a FlashArray//XR2/3, what mezzanine ports are used on the controllers?

• ETH6 and ETH8
• ETH6 and ETH9
• ETH7 and ETH9

An Implementation Engineer is onsite to add two 4-port FC cards to a FlashArray//X20R3. In what state should the controller be in before performing the card add procedure?

• Primary
• Secondary
• Standby

Upon completion of a hardware upgrade activity, which command should be used to unset the maintenance tag?

• purealert tag --cancel
• purealert untag --maintenance
• purealert --unset

What hardware should the Implementation Engineer find in the upgrade kit in order to perform an//X to //XL NDU?

• 2 QSFP cables / 3 Mellanox cards / 20 DFMDs
• 3 QSFP cables / 4 Mellanox cards / 10 DFMDs
• 4 QSFP cables / 2 Mellanox cards / 20 DFMDs

A customer has purchased a DirectFlash Shelf, but lacks available space in the same rack as the chassis. There is available space in a rack 6m away. What step should be taken prior to implementation?

• Make space in the rack where the chassis is located.
• Order 7m DirectFlash Shelf cables.
• Relocate the chassis to the rack where there is space for the shelf.

What is the required PSU wattage for a FlashArray// X70R2/R3 or X90R2/R3 array?

• 1200W
• 1300W
• 1600W