Free Dell PowerScale Maintenance Version 2 Exam D-PSC-MN-01 Exam Practice Test

What accurately describes the InfiniBand cable support?

• Supports QSFP to QSFP cabling only
• Supports QSFP to QSFP cabling or QSFP to CX4 cabling
• Supports QSFP to CX4 cabling only
• Supports front-end customer external traffic

What type of NIC can be used for the external network on a Dell PowerScale F600 node?

• 1/10 GbE
• 10/100 GbE
• 10/25 GbE
• 25/40 GbE

Which interface is capable of providing the most extensive set of information about the cluster state and configuration settings?

• Web console
• Serial console
• CLI
• Platform API

When a platform engineer disconnects and removes the power supply from a Dell EMC PowerScale Gen 6 node, they see an LED on the inside of the compute module.What does the LED indicate?

• Power supply was not removed correctly and the node is shutting down.
• Platform engineer has exactly two minutes to swap the power supply.
• Visible LED is from the front panel of the node.
• Pair node is supplying redundant power.

What can be viewed using the isi_upgrade_logs _s command?

• Post upgrade errors
• Current upgrade state
• Active upgrade errors
• Upgrade assessment results

What step should be performed when testing connectivity between a Dell EMC PowerScale cluster and an NFS client?

• Map a drive to the default IFS share on the cluster
• Ping the DNS server used by the cluster from PuTTY
• Create an NFS export and mount it on the NFS client
• In a Web browser, type the cluster name and press Enter

Which items are FRUs on a Dell EMC PowerScale Gen 6.5 node?

• SSD, power supply, and front-end NIC
• DIMM, system battery, and front-end NIC
• DIMM, back-end NIC, and SSD
• DIMM, back-end NIC, and power supply

A platform engineer must replace a failed chassis on a Dell PowerScale Gen6 cluster. What must the engineer do after powering off the nodes?

• Remove the drive sleds, label them for identification, and place the drive sleds In the newly installed chassis.
• Remove the drive sleds and motherboard and transfer them to the new chassis.
• Remove the drives and compute modules and reimage each drive before installing them in the chassis.
• Remove the drives, install the chassis, and place the drives in the new chassis.

Dell EMC Technical Support has requested a part to be sent directly back to Dell Logistics to be studied. Which process or document needs to be completed prior to sending the part back?

• WWF
• CDMR
• DMR
• WWFA

A cluster consists of H400 nodes. A200 nodes, and tour Gen6 bays available tor expansion. An engineer plans to open bays.What is the result?

• A300 nodes can be added and become members of the A200 node pool through the compatibility mode.
• A300 nodes cannot be installed in this cluster.
• A300 nodes can be added, and a new A300 node pool is created.
• A300 nodes can be added and become members of the H400 node pool through the compatibility mode.