Free Dell PowerEdge XE9680 and XE8640 Install Exam D-PEXE-IN-A-00 Exam Practice Test

A customer wants to implement 20 PowerEdge XE9680 servers for development and rendering of their studio CGI production. The solution includes a shared development environment with multiple outside partners, professionals, and hobbyists.Due to the heating and cooling limitations of the data center, what GPUs should be used for the servers?

• Intel Data Center Max 1550
• NVIDIA A100 GPUs
• AMD ROCm
• NVIDIA H100 GPUs

A deployment engineer is installing a PowerEdge XE8640 server in a rack with round holes. They cannot get the outer rail portion to fit flush with the rack frame.What is the reason the outer rail is not flush with the frame?

• The rail latch is not engaged.
• The PowerEdge XE8640 does not support a round-hole rack.
• A small offset is expected between the rail mounting post and the rack.
• Weight has not been applied to the rail.

A deployment engineer is installing a PowerEdge XE8640 server. The rack has four PDUs. Looking at the rear of the rack, one power source provides power to the two left PDUs. A different power source provides power to the two right PDUs.What side of the rack should XE8640 PSU 1 and PSU 2 be connected?

• PSU 2 in the left and PSU 1 in the right
• PSU 1 and PSU 2 in the left PDUs
• PSU 1 and PSU 2 in the right PDUs
• PSU 1 in the left and PSU 2 in the right

A deployment engineer is connecting the network cables on an XE9680 server. The data center administrator wants to know why the server does not have an OCP card for network connectivity.How should the engineer respond to the administrator's query?

• An OCP card is required for the server to achieve POST when powered on.
• The LOM card acts as an OCP card and supports OCP 3.0.
• The OCP card is an optional component.
• The server does not support an OCP card.

A deployment engineer is installing an XE9680 server. The network connectivity has 24 optical cables that route to switches in the data center. The administrator questions the use of a cable management arm (CMA).What are two items to consider when installing a CMA?The CMA can be installed to open on either the left or right side of the server.Do not route optical cables through the CM

• A CMA can only be installed with a strain relief bar.
• The XE9680 does not support a CMA.

A deployment engineer installed and powered on a XE8640 server. The Linux operating system is installed. They need to update the drivers on the server.What is a consideration before updating the driver?

• A single graphics driver supports all modern GPUs.
• Each GPU model has a distinct driver package.
• The driver package only supports Windows operating systems.
• You can upload the driver package using the iDRAC UI.

A deployment engineer arrives on-site to install an XE9680 server. The server lift does not have the ability to maneuver beneath the XE9680 shipping pallet.How many people must you have to physically pick up the server to place it on the lift shelf?

• 4. The server is heavy, and the lift shelf does not rest on the floor.
• 3. Two people are needed to tilt the server while the third person slides the shelf beneath the server.
• 2. At least one person on each side is needed to pick up the server and place on the lift.
• 1. They can tilt the server and slide the lift underneath.

What must be considered regarding stab-in rails with installing a PowerEdge XE server?

• Enable a vertical installation of the server with the use of J-slots.
• Do not support extending the server from the rack.
• Only used in 4-post, square hole racks.
• Inner rail must be installed on the server before installing in rack.

A deployment engineer is installing eight PowerEdge XE9680 servers. Two servers will be installed in each of four racks. The data center managers must plan for the power needed to supply power to the four racks.What power consumption information can the deployment engineer give the data center manager?

• Each rack must have at least 6 PDUs for power high availability.
• Each server has four 2800-Watt, 15.6 Amp PSUs.
• Each rack must power 12, 2800-Watt, 15.6 Amp PSUs.
• Each PDU must use a C20-type connection.

A deployment engineer goes on-site to install a mix of XE systems in a customer testing and development data center. The customer engineering group is stress testing the PowerEdge XE servers todetermine the best XE server for their software applications. As one of the first steps, they must ensure the correct server rails are on-site.Which three options are a correct matching of rail type with server type?

• XE9640 and B27
• XE9680 and B25
• XE9640 and B25
• XE8640 and B27
• XE9680 and B28