Free Dell Networking Foundations 2023 Exam D-NWG-FN-23 Exam Practice Test

How are ACLs processed?

• LIFO
• FIFO
• Randomly
• Sequentially

In the OS10 CLI what does Ctrl+A do?

• Deletes all the text before the cursor.
• Moves the cursor to the start of the command line.
• Moves the cursor to the end of the command line.
• Deletes the word before the cursor.

Which best describes traffic flow in a campus network environment?

• North-East
• South-West
• East-West
• North-South

What benefit does VRRP version 3 provide over VRRP version 2 in OS10?

• Provides preemption capability.
• Provides MD5 authentication.
• Allows subsecond timers.
• Allows multiple masters in the topology.

Which commands are required to properly configure an OS10 switch to run OSPF on eth1/1/3 and to add network 144.254.1.0/30 to OSPF area 0?

• OS10(config)# interface ethernet 1/1/3 OS10(conf-if-eth1/1/3)# no shutdown OS10(conf-if- eth1/1/3)# no switchportOS10(conf-if-eth1/1/3)# ip address 144.254.1.2/30 OS10(conf-if-eth1/1/3)# ip ospf 1 area 0.0.0.0OS10(config)# router ospf1
• OS10(config)# router ospf 1OS10(config-router-ospf-1)# router-id 1.1.1.1 OS10(config)# interface ethernet 1/1/3 OS10(conf-if- eth1/1/3)# no shutdown OS10(conf-if-eth1/1/3)# no switchport OS10(conf-if-eth1/1/3)# ip ospf 1 area 0.0.0.0
• OS10(config)# interface ethernet 1/1/3 OS10(conf-if-eth1/1/3)# no shutdown OS10(conf-if-eth1/1/3)# ip address 144.254.1.2/30 OS10(conf-if-eth1/1/3)# no switchport OS10(conf-if-eth1/1/3)# ip ospf 1 area 0.0.0.0 OS10(config)# router ospf 1
• OS10(config)# interface ethernet 1/1/3 OS10(conf-if-eth1/1/3)# no shutdown OS10(conf-if-eth1/1/3)# ip address 144.254.1.2/30 OS10(conf-if-eth1/1/3)# no switchport OS10(conf-if-eth1/1/3)# ip ospf 1 area 0.0.0.0 OS10(conf-if-eth1/1/3)# router ospf 1

When installing OS10 on a switch from a USB drive, what format is used for the file system?

• HFS+
• FAT32
• NTFS
• HFS

Which command is used to create a non-default VRF instance?

• ip vrf
• ip vrf forwarding new-vrf
• ip vrf forwarding vrf-test
• interface ethernet 1/1/1

Which switch mode is used to manage files and display switch information?

• Interface
• Network
• Exec
• Configuration

From which range can a network administrator choose when setting the RSTP priority value?

• 1-6400
• 0-61440
• 0-614400
• 1-64

In a PIM Sparse Mode (PIM-SM) based multicast topology, what function does the Rendezvous Point provide?

• The node is used to provide IGMP snooping across a layer 3 boundary.
• The root node of the source tree topology is used to provide routing between the source and receiver.
• The root node of the shared tree topology is used to provide routing between the source and receiver.
• The node is used to provide IGMP snooping on a layer 2 shared segment.