Free A10 Certified Professional System Administration 4 Exam A10-System-Administration Exam Practice Test

When VRRP-A is enabled on a device with multiple partitions, which statement about VRID 0 is correct?

• Each partition has its own distinct VRID 0.
• VRID 0 only exists in the shared partition; private partitions can only contain VRIDs numbered higher than 0.
• VRID 0 is initially enabled only in the shared partition; partition administrators can enable VRID 0 in their partitions.
• When using VRRP-A on a device with multiple partitions, VRID 0 is automatically disabled.

What information is typically submitted with every aXAPI call after the initial login is complete?

• Authorization header with signature
• The ACOS device serial number
• The programming language being used
• The AXAPI special permission XML file
• Log file location

ACOS can log the following accounting records for administrative sessions:

• device access attempts only
• syslog errors of a specified severity level
• device access and command entry attempts
• command entry attempts only
• syslog errors of severity greater than a specified level

Which three items does aXAPI require to configure an ACOS object (such as an SLB object)? (Choose three.)

• Endpoint with parameters
• Authorization signature
• Device’s VIP URL
• Device’s serial number
• Device’s management/data IP
• Encrypted connection to device

Select the statement that describes aXAPI authentication and authorization requirements:

• aXAPI requires that users are assigned to the “aXAPI” role before they can execute a script.
• aXAPI is subject to the same permissions requirements as the CLI and GUI.
• aXAPI has special permissions that differ from CLI and GUI permissions.
• aXAPI is subject to authorization but not authentication requirements.

When vBlade A issues a “vcs vmaster-take-over 200” command, which statement is true?

• The command is ignored when the current vMaster is in vMaster maintenance mode.
• Any subsequent vmaster-take-over command within the chassis with a parameter smaller than 201 is ignored.
• The 200 priority is compared to the current vmaster’s default vrid priority to determine which device controls the chassis.
• If an administrator on vBlade B were to simultaneously issue command vcs vmaster-take-over 210, vBlade B would become the vMaster.

Device 1 is the vMaster in a virtual chassis. Select the command set that adds an IP address to VE interface 200 on device 3?

• interface ve 200 device 3 ip address 198.162.4.1 /24
• interface device-context 3 interface ve 200 ip address 198.162.4.1 /24
• interface ve 3/200 ip address 198.162.4.1 /24
• vcs device-context device 3 interface ve 200 ip address 198.162.4.1 /24

Which statement correctly describes the result of the following commands? ACOS(config)#logging host 192.168.216.45ACOs(config)#end ACOS#active-partition p1 Currently active partition: p1ACOS[p1](config)#logging host 2.2.2.2 ACOS[p1](config)#logging host partition shared

• System logs generated from partition “p1” will be sent to logging server “2.2.2.2”, and only warning severity log messages are sent to the shared logging server’s “192.168.216.45”.
• System logs generated from partition “p1” will be sent to logging server “2.2.2.2”, as well as to the shared logging server’s “192.168.216.45”.
• System logs generated from partition “p1” will be sent to logging server “2.2.2.2”.
• System logs generated from partition “p1” will be sent to the shared logging server’s “192.168.216.45”.

Which statement correctly describes the following configuration? snmp enable traps slb-change serversnmp enable traps slb-change server-port snmp enable traps slb-change vipsnmp enable traps slb-change vip-port

• These commands enable SNMP traps for any SLB changes
• These commands enable SNMP traps for only SLB changes related to virtual-server
• These commands only enable SNMP traps for the creation or removal of virtual and real servers and ports
• These commands enable SNMP traps for only SLB changes related to real-servers

What do we know about the state of the system from the CLI prompt? (Choose two.) A1-vMaster[1/1][Helium2]#

• There is only 1 member in this A10 Virtual Chassis.
• There are at least 2 private partitions configured.
• aVCS has been configured, and this host is part of aVCS set 1.
• aVCS has been configured, and this host is part of aVCS set 1/1.
• Application Delivery Partitions have been configured.