Free VMware vSAN Specialist v2 Exam 5V0-22.23 Exam Practice Test

• Ensure accessibility
• Partial maintenance mode
• Full data migration
• No data migration

After reviewing various performance charts at a cluster level, an administrator found an individual VM impacting overall performance of the vSAN cluster.What feature should be used to introspect multiple performance metrics of a single virtual machine?

• esxci
• Skyline Health
• I/O Trip Analyzer
• llOlnsiqht

A customer wishes to host a new range of applications with high-performance needs, specifically,low latency.The applications are required to be hosted at company-owned edge locations, each with minimal rack space (three host slots per edge location for this project).Which deployment options would satisfy the customer's needs, while maximizing the amount of capacity available per deployment?

• A new three-node vSAN 8.0 All-Flash Cluster with OSA in each edge location Each application VM configured with a RAID-5 VM storage policy
• A new three-node vSAN 8.0 All-Flash Cluster with OSA in each edge location Each application VM configured with a RAID-1 VM storage policy
• A new three-node vSAN 8.0 All-Flash Cluster with ESA in each edge location Each application VM configured with a RAID-1 VM storage policy
• A new three-node vSAN 8.0 All-Flash Cluster with ESA in each edge location Each application VM configured with a RAID-5 VM storage policy

A vSAN administrator has a vSAN cluster that is using vSphere Lifecycle Manager (vLCM) to manage hypervisor, server drivers, and firmware. All hosts in the cluster are compliant according to the vLCM image.A 10GB NIC on the servers is experiencing issues, and the vSAN administrator determines a new network driver will resolve the problem. Unfortunately, the required NIC driver is a newer version compared to the driver provided by the most recent Vendor Add-on.Which action should the vSAN administrator take to ensure the latest network driver is installed on the NIC before remediation?

• Make sure the vLCM image is configured to use the most recent version of the Vendor Add-on
• Add an individual component to the vLCM image that has the updated NIC driver
• Remove the Vendor Add-on from the vLCM image, and then manually install the network driver on the servers
• Modify the vLCM image to omit the NIC Driver, and then manually update the servers with the required NIC driver

An administrator wants to assign a storage policy to a workload on a two-node vSAN OSA cluster consisting of three disk groups each with nested fault domains. The virtual machine must be protected against a disk or disk group failure.Which two storage policies meet these requirements? (Choose two.)

• RAID-5/FTT 2
• RAID-1/FTT 3
• RAID-6/FTT 2
• RAID-5/FTT 1
• RAID-1/FTT 1

What is the maximum amount of capacity disks an administrator can have in disk groups on a singlevSAN OSA host?

• 35
• 40
• 30
• 25

A vSAN administrator is tasked to perform an upgrade of a vSAN cluster, including firmware and drivers for its hardware. The vSAN administrator already created an image using vSphere Lifecycle Manager (vLCM).Prior to selecting Start Remediation, which step should be taken to upgrade the complete vSAN cluster as a single task?

• Select Remediate All through vLCM to upgrade all hosts in the cluster
• Place all hosts in the vSAN cluster into Maintenance Mode
• Stage the upgrade of the vSAN cluster through vLCM
• Manually remediate one host at a time in the vSAN cluster

An administrator is deploying a new two-node vSAN cluster with a shared witness to a remote location.Which requirement must be met?

• The ESXi hosts must have SSDs or NVMe configured for Virtual Flash File System.
• The ESXi host's controller cache and advanced features must be disabled.
• The ESXi host's drives must be configured in RAID 1 to support Failures to Tolerate of 1.
• The ESXi hosts must have a minimum of 64 GBs of memory.

A vSAN administrator needs to build a vSAN ESA cluster with RAID-5/FTT 1 adaptive storage policy. What is the absolute minimum number of hosts that need to be part of that vSAN ESA cluster?

• 6 hosts
• 4 hosts
• 5 hosts
• 3 hosts

The Resyncing Objects view in the vCenter UI reports that some objects are currently resyncing. Which two actions would cause this situation? (Choose two.)

• A change to the storage policy is applied to the objects.
• DRS is relocating VMs between vSAN nodes.
• A host failure occurs in the cluster
• HA Virtual Machine Monitoring forced a VM to reboot.
• VM snapshot is being deleted.