Free VMware vSphere 8.x Advanced Design Exam 3V0-21.23 Exam Practice Test

An architect is tasked with designing a repeatable edge hosting solution using VMware technologies that can be deployed to existing hotels across the world and operate independently of other locations.During interviews with stakeholders, the architect notes the following information: There are 123 hotels in total.All hotels have a minimum of two 1 Gbps connections for guest Internet access. The company operates hotels in four countries: Canada, USA, Cuba and Mexico. The company is rebranding the hotels located in Mexico.Which of these is a business factor that will impact this design?

• The company is rebranding the hotels located in Mexico.
• The company operates hotels in four countries: Canada, USA, Cuba and Mexico.
• There are 123 hotels in total
• All hotels have a minimum of two 1 Gbps connections for guest Internet access.

An architect is updating the design for a vSphere environment.During a workshop focused on security, the following has been identified:It has been determined that any configuration of ESXi hosts can only be completed via VMware vCenterThe Direct Console User Interface (DCUI) service must be disabled on ESXi hosts The SSH service must be disabled on ESXi hostsBased on the information from the workshop, which element does the architect need to include in the design?

• Strict Lockdown Mode
• Normal Lockdown Mode
• Normal Lockdown Mode with a defined Exception User list
• Strict Lockdown Mode with a defined Exception User list

An architect is tasked with designing a solution to monitor the operational state of a VMware Cloud Foundation environment through ad-hoc reporting and custom dashboards, alerts, and notifications.Using VMware Validated Solutions, which validated solution can the architect leverage to meet this requirement?

• Private Cloud Automation for VMware Cloud Foundation
• Intelligent Operations Management for VMware Cloud Foundation
• VMware Validated Design for VMware Cloud Foundation Heath Reporting and Monitoring for VMware Cloud Foundation

An architect is creating a design for a new vSphere solution to meet the following business requirement:REQ001 - Reduce operational expenditureWhich design decision could the architect include in the logical design to satisfy this requirement?

• Use vSphere Standard licenses on all clusters.
• Use heterogeneous hardware for the hosts in all clusters.
• Use vSphere Lifecycle Manager on all clusters.
• Use an N + 1 design to define the required capacity on all clusters.

An architect is holding a requirements workshop with a customer for a new vSphere solution design. The customer states that the solution should make it easy to identify and apply patches or updates to ESXi hosts, including the ability to pre-stage the files on the ESXi hosts.Which design quality is being referenced by the customer?

• Recoverability
• Manageability
• Performance
• Availability

An architect is reviewing the security and compliance requirements for a new application that will be hosted on a vSphere 8 environment.The following information has been noted about the new application: The application stores and processes confidential dataThe supporting virtual infrastructure is shared with other departments No other application stores or processes confidential dataThe application virtual machines must be able to run on any ESXi host in the cluster The storage layer is a iSCSI attached SANData at Rest Encryption is in place for each presented LUN validated to FIPS 140-2 No budget is available for additional infrastructure components or software Application data must not be accessible outside of the application's virtual machinesThe architect has been tasked with providing a secure virtual machine design to host the application. Which three design elements must the architect include to meet the requirements? (Choose three.)

• Virtual Machine Encryption
• The vSphere Native Key Provider
• A new encrypted iSCSI LUN
• External Key Management Service (KMS) provider
• A new local VMFS volume
• VMware vSAN

A company has a requirement that all production applications must have a maximum tolerable downtime (MTD) of one hour per month.Which statement would be included in the conceptual design to support this requirement?

• Production applications will run in a dedicated Tier 2 cluster.
• Server hardware has been allocated for the production applications.
• vSphere Fault Tolerance (FT) will not be enabled for the production applications.
• vSphere HA Host Failure Response will be set to Restart VMs.

An architect is reviewing the information gathered from an initial requirements gathering workshop. The following requirements have been identified:REQ001 – The architecture must support tracking of administrative logons and actions. REQ002 – The architecture must support class three (three nines or 99.9%) system availability.REQ003 – The architecture must report on system usage in terms of CPU, memory, storage and network.REQ004 – The architecture must provide for system recovery point objective (RPO) of two hours.REQ005 – The architecture must provide access to a precision time protocol (PTP) for time synchronization.Which two of the listed requirements would be classified as business (formerly functional) requirements? (Choose two.)

• The architecture must provide access to a precision time protocol (PTP) for time synchronization.
• The architecture must report on system usage in terms of CPU, memory, storage and network.
• The architecture must support class three (Three nines or 99.9%) system availability.
• The architecture must support tracking of administrative logons and actions.
• The architecture must provide for system recovery point objective (RPO) of two hours.

An architect is documenting the design for a new vSphere cluster. The customer provides the following information:All ESXi hosts will use hardware from the same vendorAll ESXi hosts will be monitored for hardware related issues using the vendor's monitoring toolingThe vendor's monitoring tooling provides a plugin for vCenter to allow the hardware status to be visibleThe customer also informs the architect of the following requirements:Workloads must be automatically relocated to other hosts in the event that a host hardware is marked as degraded.Workloads must be automatically restarted on other hosts in the event of a host failure. What should the architect include in the design to meet these requirements?

• vSphere HA will be enabled and set to Power off and Restart VMs in response to a host isolation. Proactive HA will be enabled with an Automation Level of Automated.
• vSphere HA will be enabled and set to Power off and Restart VMs in response to a host isolation. VM Monitoring will be enabled with a setting of VM Monitoring.
• vSphere HA will be enabled and set to restart VMs in response to a host failure. VM Monitoring will be enabled with a setting of VM and Application Monitoring. D.
• vSphere HA will be enabled and set to restart VMs in response to a host failure. Proactive HA will be enabled with an Automation Level of Automated.

An architect is designing a new vSphere solution. The solution will be used to host workloads that have multiple dependencies. The customer provides the following information regarding the workloads:Workload 1: Self-Service Portal Workload 2: Database Workload 3: Identity Broker Workload 4: Reporting Tool Workload 5: Management ToolApplication A is formed of workloads 1 and 2 and has a dependency on workload 3 Application B is formed of workloads 2 and 4 and has a dependency on workload 3 Application C is formed of workload 5 and has a dependency on workload 4How should the architect document the vSphere HA requirements to ensure that all of the applications can be recovered in the event of a host failure while observing the dependencies?

• Set vSphere HA to Restart VMs in response to a Host Failure Set the Restart Priority of workload 3 to High
• Set the Restart Priority of workload 4 to Medium
• Set the Restart Priority of workloads 1, 2 and 5 to Low
• Set vSphere HA to Shut Down and Restart VMs in response to a Host Isolation Set the Restart Priority of workloads 3 and 4 to High
• Set the Restart Priority of workload 5 to Medium Set the Restart Priority of workloads 1 and 2 to Low C.
• Set vSphere HA to Restart VMs in response to a Host Failure Set the Restart Priority of workloads 3 and 4 to High
• Set the Restart Priority of workload 5 to Medium Set the Restart Priority of workloads 1 and 2 to Low D.
• Set vSphere HA to Shut Down and Restart VMs in response to a Host Isolation Set the Restart Priority of workload 3 to High
• Set the Restart Priority of workloads 4 and 5 to Medium Set the Restart Priority of workloads 1 and 2 to Low