Free Implementing Cisco Collaboration Core Technologies Exam 350-801 Exam Practice Test

Which two protocols can be configured for the Cisco Unity Connection and Cisco UCM integration? (Choose two.)

• H. 323
• SIP
• SCCP
• MGCP
• RTP
• 323 is an older signaling protocol that is no longer widely used. MGCP, or Media Gateway Control Protocol, is a protocol used for controlling media gateways. RTP, or Real-time Transport Protocol, is a protocol used for transporting real-time data, such as voice and video

An engineer is going to redesign a network, and while looking at the QoS configuration, the engineer sees that a portion of the network is marked with AF42. Which type of traffic is marked with this tag?

• signaling
• voice
• video conference
• streaming video

A customer wants a video conference with five Cisco Telepresence 1X5000 Series systems. Which media resource is necessary in the design to fully utilize the immersive functions?

• Cisco Webex Meetings Server
• software conference bridge on Cisco UCM
• Cisco Meeting Server
• Cisco PVDM4-128

A customer enters no IP domain lookup on the Cisco IOS XE gateway to suppress the interpreting of invalid commands as hostnames Which two commands are needed to restore DNS SRV or A record resolutions? (Choose two.)

• ip dhcp excluded-address
• ip dhcp-sip
• ip dhcp pool
• transport preferred none
• ip domain lookup

Which command must be defined before an administrator changes the linecode value on an ISDN T1 PRI in slot 0/2 on an IOS-XE gateway?

• isdn incoming-voice voice
• pri-group timeslots 1-24
• card type t1 0 2
• voice-port 0/2/0:23

Which service on the Presence Server is responsible for maintaining the point-to-point chat connections between Jabber clients?

• Cisco SIP Proxy
• Cisco XCP Text Conference Manager
• Cisco XCP Router
• Cisco XCP XMPP Federation Manager

A company wants to provide remote users with access to its on-premises Cisco collaboration features. Which components are required to enable Cisco Mobile and Remote Access for the users?

• Cisco Expressway-E, Cisco IM and Presence Server, and Cisco Video Communication Server
• Cisco Unified Border Element, Cisco IM and Presence Server and Cisco Video Communication Server
• Cisco Expressway-E, Cisco Expressway-C, and Cisco UCM
• Cisco Unified Border Element, Cisco UCM, and Cisco Video Communication Server

An administrator must make a pattern to route calls to two different destinations john doe@company com and jane doe@company com Which type of patterns are needed in the Cisco UCM. and what must the pattern look like?

• A SIP route pattern that looks like the *@company.com
• A SIP route pattern that looks like this company.com
• A regular route pattern with URI feature enable in the configuration page. The pattern must look like this:(*@company.com)
• A regular route pattern with URI feature enable in the configuration page. The pattern must look like this:MATCH(*@company.com)

An engineer must configure a SIP route pattern using domain routing with destination +13135551212. The domain ciscocm1.jupiter.com resolves to 192.168.1.3. How must the IPV4 Pattern be configured?

• +13135551212@192.168.1.3
• ciscocm1.jupiter.com
• \+13135551212@192.168.1.3
• 192.168.1.3

On a Cisco Catalyst Switch, which command is required to send CDP packets on a switch port that configures a Cisco IP phone to transmit voice traffic in 802.10 frames, tagged with the voice VLAN ID 221?

• Device(config-if)# switchport voice vlan 221
• Device(config-if)# switchport vlan voice 221
• Device(config-if)# switchport access vlan 221
• Device(config-if)# switchport trunk allowed vlan 221