Free BIG-IP LTM Specialist: Architect, Set up, Deploy Exam 301a Exam Practice Test

An LTM Specialist to configure a backend server to be disabled it takes longer than 30 seconds to respond to a request.Which values should the LTM Specialist enter for interval and timeout?

• Interval 10, timeout 30
• Interval 10, timeout 31
• Interval 30, timeout 30
• Interval 30, timeout 91 The official recommendation is that timeout 3 times the interval value +1.

An LTM Specialist needs to enable TCP connection re-use for a non-HTTP application. The application uses a simple request response protocol where each request and response is contained within a single packet.Which configuration option should the LTM Specialist adjust?

• increase the connection limit for pool members
• increase the idle Timeout in a custom TCP profile
• use a Performance (Layer 4) Virtual Server
• assign a OneConnect profile

An organization's development team creates an application to put behind the F5 LTM device. The application can be quite load intensive at first, and then evens out over time. The team's load balancing method needs to select a pool after taking into account the pool member's response over the time to avoid landing on a busy pool member.Which of the following load balancing methods meets this requirement?

• Fastest (application)
• Predictive (member)
• Dynamic (node)
• Observed (member)

An LTM Specialist needs to deploy a virtual server that will load balance traffic targeting https://register.example.com to a set of three web servers. Persistence needs to be ensured. No persistence mirroring is allowed SSL offloading is required.What are the required profile and persistence settings to implement this

• tcp. dientssl, hup, source address persistence
• tcp, clientssl, http. cookie persistence
• tcp, clientssl, serverssl, ssl persistence
• tcp, clientssl, http, serverssl cookie persistence

An LTM Specialist must create a new virtual server for HTTP access. The LTM Specialist creates a forwarding virtual server to reach the resource.What is a potential result of this action?

• IP conflict result
• HTTP traffic is NOT allowed
• Other service ports could be allowed
• Packet filter allowances are also required

Six servers have a varying number of connections that change based on the user load.Which load balancing method should an LTM Specialist apply to divided the web application traffic to the servers on the relative performance trend?

• Least Sessions
• Least Connections
• Predictive
• Ratio

An LTM device needs an additional traffic group.Which configuration item is required?

• Default device
• Group name
• MAC Masquerade Address
• Auto Fallback Timeout

AN LTM Specialist is deploying an iRule designed to determine the country of origin of an incoming client connection. The iRule needs to be used with an SSL-enabled web application.Which profile required for the iRule to function properly?

• HTTP
• DNS
• TCP
• UDP

An application is expected to maintain more than 100,000 concurrent TCP connections to a single pool member.What is an appropriate SNAT configuration in this situation?

• A SNAT pool with 4 IP addresses
• SNAT automap enabled
• A static SNAT
• A SNAT pool with IP address Explanation One IP can establish 65,535 connections only the number of snapit's IP exceeds 100,000. AT least two snaptips are required. Options B, C, and all have only IP, which is obviously not enough

An LTM Specialist needs to configure a setup for antivirus scanning of HTTP traffic with an internet Contact adaption Protocol (ICAP) server.Which two server type should be used? (Choose two.)

• Standard
• Internal
• Performance HTTP
• Forwarding IP
• Stateless