Free Implementing Cisco Application Centric Infrastructure (300-620 DCACI) Exam 300-620 Exam Practice Test

The company ESXi infrastructure is hosted on the Cisco UCS-B Blade Servers. The company decided to take advantage of ACI VMM integration to enable consistent enforcement of policies across virtual and physical workloads. The requirement is to prevent the packet loss between the distributed virtual switch and the ACI fabric. Which setting must be implemented on a vSwitch policy to accomplish this goal?

• Static Channel
• MAC Pinning
• LACP
• LLDP

An engineer must deploy Cisco ACI across 10 geographically separated data centers. Which ACI site deployment feature enables the engineer to control which bridge domains contain Layer 2 flooding?

• GOLF
• Multi-Site
• Multi-Pod
• Stretched Fabric

An engineer is implementing a connection that represents an external bridged network. Which two configurations are used? (Choose two.)

• Layer 2 remote fabric
• Layer 2 outside
• Layers 2 internal
• Static path binding
• VXLAN outside

All workloads in VLAN 1001 have been migrated into EPG-1001. The requirement is to move the gateway address for VLAN 1001 from the core outside the Cisco ACI fabric into the Cisco ACI fabric. The endpoints in EPG-1001 must route traffic to endpoints in other EPGs and minimize flooded traffic in the fabric. Which configuration set is needed on the bridge domain to meet these requirements?

• Disable ARP Flood Disable Limn Endpoint Learning
• Enable Hardware Proxy Enable Unicast Routing
• Disable Local IP Learning Limit Disable Unicast Routing
• Enable Flood Enable Unicast Routing

Which attribute should be configured for each user to enable RADIUS for external authentication in Cisco ACI?

• cisco-security domain
• cisco-auth-features
• cisco-aci-role
• cisco-av-pair

An ACI engineer is implementing a Layer 3 out inside the Cisco ACI fabric that must meet these requirements:The data center core switch must be connected to one of the leaf switches with a single 1G link.The routes must be exchanged using a link-state routing protocol that supports hierarchical network design.The data center core switch interface must be using 802.1Q tagging, and each vlan will be configured with a dedicated IP address.Which set of steps accomplishes these goals?

• Set up the ElGRP Protocol policy with the selected Autonomous System number. Set up the Routed External Network object ana Node Profile, selecting ElGRP Create the Switch profile, selecting Port-channel and the appropriate interfaces Create the default network and associate it with the Routed Outside object.
• Set up the BGP Protocol policy with the Autonomous System number of 0. Configure an interface policy and an External Bridged Domain. Create an External Bridged Network using the configured VLAN pool. Build the Leaf profile, selecting Routed sub-interface and the appropriate VLAN.
• Configure the OSPF Protocol policy with an area of 0. Create Routed Outside object and Node Profile, selecting OSPF as the routing protocol. Build the Interface profile, selecting Routed Sub-interface and the appropriate VLAN. Configure the External Network object with a network of 0.0.0.0/0.
• Set up the ElGRP Protocol policy with the selected Autonomous System number. Create the Routed Outside object and Node Profile selecting ElGRP Configure the Interface profile selecting Routed Interface and the appropriate interfaces. Create the External Network object with a network of 0.0.0.0/0.

An engineer must implement management policy and data plane separation in the Cisco ACI fabric. Which ACI object must be created in Cisco APIC to accomplish this goal?

• Application profile
• Tenant
• Contract
• Bridge domain

The company's Cisco ACI fabric hosts multiple customer tenants. To meet a service level agreement, the company is constantly monitoring the Cisco ACI environment. Syslog is one of the methods used for monitoring. Only events related to leaf and spine environmental information without specific customer data should be logged. To which ACI object must the configuration be applied to meet these requirements?

• access policy
• infra tenant
• switch profile
• fabric policy

On which two interface types should a user configure storm control to protect against broadcast traffic? (Choose two.)

• APIC facing interfaces
• port channel on a single leaf switch
• all interfaces on the leaf switches in the fabric
• endpoint-facing trunk interface
• fabric uplink interfaces on the leaf switches

What two actions should be taken to deploy a new Cisco ACI Multi-Pod setup? (Choose two.)

• Configure MP-BGP on IPN routers that face the Cisco ACI spines.
• Connect all spines to the IPN.
• Configure anycast RP for the underlying multicast protocol
• Configure the TEP pool of the new pod to be routable across the IPN.
• Increase interface MTU for all IPN routers to support VXLAN traffic.