Free Implementing Cisco Enterprise Wireless Networks Exam 300-430 Exam Practice Test

Which two protocols are used to communicate between the Cisco MSE and the Cisco Prime Infrastructure network management software? (Choose two.)

• HTTPS
• Telnet
• SOAP
• SSH
• NMSP

An engineer is configuring multicast for two WLCs. The controllers are in different physical locations and each handles around 500 wireless clients. How should the CAPWAP multicast group address be assigned during configuration?

• Each WLC must be assigned a unique multicast group address.
• Each WLC management address must be in the same multicast group.
• Both WLCs must be assigned the same multicast group address.
• Each WLC management address must be in a different multicast group.

An engineer configures the wireless LAN controller to perform 802.1x user authentication. Which configuration must be enabled to ensure that client devices can connect to the wireless, even when WLC cannot communicate with the RADIUS?

• pre-authentication
• local EAP
• authentication caching
• Cisco Centralized Key Management

An engineer needs read/write access to rename access points and add them to the correct AP groups on a wireless controller. Using Cisco ISE TACACS, which custom attributes is the minimum required?

• role1=WLAN
• role1=WLAN role2=SECURITY
• role1=WLAN role2=WIRELESS
• role1=WIRELESS

An IT administrator deploys Cisco 2802i APs in all office locations, including main campus and branch offices. The WLC that manages the APs is located at the data center on the main campus. The APs on the main campus are configured to use Local mode and the APs in the branches use FlexConnect mode. Which configuration must be applied to the APs for corporate devices on the main campus to be mapped to the local LAN switch on different VLANs according to the VLAN tag ID and WLAN?

• Enable Central DHCP Processing.
• Disable FlexConnect Local Auth
• Enable FlexConnect Local Switching.
• Disable VLAN-based Central Switching.

An engineer is deploying a virtual MSE. The network has 3000 APs and needs 7000 IPS licenses.To which size server does the engineer scale it?

• virtual
• standard
• high end
• low end

A wireless engineer has performed a Wireshark ccapture on an 802.1x authentication process to troubleshoot a connectivity issue.Which two types of packet does the EAP contain? (Choose two.)

• EAP complete
• EAP response
• EAP failure
• EAP request
• EAP reply

For security purposes, an engineer enables CPU ACL and chooses an ACL on the Security > Access Control Lists > CPU Access Control Lists menu. Which kind of traffic does this change apply to as soon as the change is made?

• wireless traffic only
• wired traffic only
• VPN traffic
• wireless and wired traffic

On a Cisco Catalyst 9800 Series Wireless Controller, an engineer wants to prevent a FlexConnect AP from allowing wireless clients to connect when its Ethernet connection is nonoperational. Which command set prevents this connection?

• config terminal wireless flexconnect profile [profile name] ethernet-fallback-enable end
• config terminal wireless flexconnect profile [profile name] fallback-radio-shut end
• config terminal wireless profile flex [profile name] fallback-radio-shut end
• config terminal wireless profile flex [profile name] ethernet-fallback-enable end

An IT department receives a report of a stolen laptop and has information on the MAC address of the laptop. Which two settings must be set on the wireless infrastructure to determine its location? (Choose two.)

• Location History for Clients must be enabled on the MSE.
• Client location tracking must be enabled on the MSE.
• Location History for Visitors must be enabled on the MSE.
• Location History for Rogue APs & Rogue Clients must be enabled on the MSE.
• Tracking optimization must be enabled on the WLC.