Free VMware Professional NSX-T Data Center 2.4 2V0-41.19 Exam Practice Test

How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?

• Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.
  
• Automatically created when Tier-1 is created.
  
• Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.
  
• Automatically created when Tier-1 is connected with Tier-0 from Simplified UI.
  

Which NSX CLI command will enable the SSH service on the NSX Edge node?

• set service ssh enabled
  
• start service ssh
  
• start service ssh start-on-boot
  
• set service ssh start-on-boot enabled
  

Which security feature on Tier-1 Gateways helps limit malicious traffic?

• Unicast Reverse Path Forwarding (URPF)
  
• Centralized Service Port (CSP)
  
• Promiscuous Mode
  
• Reverse Path Forwarding (RPF)
  

Which path is used to view the NSX Controller log file?

• /var/log/cloudnet/nsx-ccp.log
  
• /var/log/controller.log
  
• /var/log/cloud/nsx-Icp.log
  
• /var/log/ccp.log
  

What are three characteristics of a transport zone? (Choose three.)

• defines the potential reach of transport nodes
  
• configured with a Single N-VDS
  
• defines the scope and reachability of a Segment
  
• configured with multiple N-VDS
  
• optional for creating a segment
  

Which network tool cloud an administrator use on an ESXi 6.7 host to capture packets when troubleshooting connectivity issues?

• Wireshark
  
• pktcap-uw
  
• net-stats
  
• tcpdump
  

Which three CLI commands will list the TEP IPs configured on an ESXi transport node? (Choose three.)

• esxcfg-vswitch -1
  
• esxcfg-vmknic -1
  
• esxcli network ip address list
  
• esxcli network ip netstack list
  
• esxcli network ip interface ipv4 get
  
• esxcli network ip interface list
  

What is the most restrictive NSX-T built-in role which will allow a user to apply configuration changes on a NSX Edge?

• Network Operator
  
• Network Engineer
  
• Cloud Service Administrator
  
• NSX Administrator
  

An NSX administrator is planning to deploy a multi-tier routing topology in their NSX-T Data Center environment to provide north-south connectivity for the VMs.Which routing component must be deployed?

• Tier-0 Gateway
  
• Edge Node
  
• Tier-1 Gateway
  
• Edge Cluster
  

Which CLI command is used to start the NSX Manager virtual machine in the KVM environment?

• virsh start <NSX-Manager-Name>
  
• B. virsh poweron <nsx-manager-name>
  
• virsh poweron <nsx-manager-ID>
  
• virsh start <NSX-Manager-ID>