Free Oracle Utilities Meter Solution Cloud Service 2022 Implementation Professional 1Z0-1091-22 Exam Practice Test

A small building with five metered apartments has common areas used by all residents. The common areas are metered separately, and the common usage needs to be spread evenly across residents. How should you configure the solution to bill each resident accurately?

• Each apartment's usage subscriptions must have two service paints, one for the apartment and one for 20% of the common areas.
• Set up a virtual meter to include the apartment usage and 20% of the common areas.
• Calculate the usage for each apartment by using customer information system (CIS).
• Use a derivation algorithm to include 20% of the common areas with the apartment accounts.

Which statement is true about usage transaction?

• It is created by an external source or Meter Data Management (MDM), which uses the usage calculation engine to generate usage values.
• It is created by an external source or MDM, which uses the usage calculation engine to generate a final value. Valuation, Estimation, and Editing (VEE) can be configured but when called in real time, usage transaction may not be saved.
• It must be created by an external system and it must be stored in the database.
• It is created by an external source or MDM, which uses the usage calculation engine to generate a final value. VEE can be configured and usage transaction is saved.

In the SaaS solution, how should you configure equipment that attaches to an asset, such as a communication module attached to a meter?

• Set up a component
• Create a master child asset
• Add a sub-asset
• Add a constituent part

A customer is starting an Advanced Meter Infrastructure (AMI) roll-out initiative and plans to use Meter Data Management (MDM). The AMI meters will record the consumption reading every 15 minutes through the day and a single register read at the end of the day. They plan to use this data for billing, load research, and presentment via their customer web portal. What is the minimum number of measuring component types the customer needs to create in MDM?

• A single measuring component type to store AMI data (15-minute interval reading along with the daily scalar register reading) for each case purpose, far example: billing, load research, and customer web portal.
• A single measuring component type to store the 15-minute interval readings and another measuring component type for the daily scalar register reading.
• A single measuring component type to store the 15-minute interval readings, and another measuring component type for the daily scalar register reading for each use case purpose, for example: billing, load research, and customer web portal.
• A single measuring component type to store the 15-minute interval readings along with the daily scalar register reading.

At which stage during the high-level process of loading interval initial measurement data does Meter Data Management (MDM) normalize measurements and why?

• Validation, Estimation, and Editing (VEE) stage, so that each interval can be compared to a specific date and time for validation.
• Create the Final Measurements stage, so that each interval measurement is stored as a single record for a specific date and time.
• Load the Initial Measurements stage, so that each interval measurement is stored as a single record for a specific date and time.
• Create the Final Measurements stage, so that each interval is stored as the adjusted value to represent an average interval value.

A customer needs to validate high or low tolerances such that exceeding in either direction must not allow the reading to be finalized. In addition, all other validation rules that are configured must be applied to the readings. Which exception severity should you configure in Validation, Estimation, and Editing (VEE) rules?

• Issues
• Terminate
• Critical
• Informational

How do you configure the derived values that are relevant for a device?

• Configure the derived values an the final measurement type for the measuring components to be defined on the device.
• Configure the derived values on the device type for the derived values to be defined on the device.
• Configure the derived values on the measuring component type for the measuring components to be defined on the device.
• Configure the derived values on the measuring component for the measuring components to be defined on the device.

How do you calculate the power factor for a bill?

• Use the Vector and Quantity Math rule to derive the power factor from the kWh and kVArh channels.
• Use a virtual meter to perform the calculations.
• Use a measuring component derivation algorithm to calculate the power factor.
• Power factor can only come from the meter and cannot be calculated.

Devices are often added to Meter Data Management (MDM) via a synchronization process. Device configuration business objects (BOs) can be configured to use Synchronization Add BO to determine the appropriate BO for the new device. What is Synchronization Add BO associated with?

• Business service associated with Dl-Device Configuration BO
• Options on Dl-Device Configuration BO
• Validation algorithm on Dl-Device Configuration BO
• Lifecycle algorithm on Dl-Device Configuration BO

Which relationship must be established with an external system or a service provider before creating bill determinants in Meter Data Management (MDM)?

• Usage factor
• Usage transaction
• Usage subscription
• Usage rule