Free Deploy and Manage Citrix ADC 13 with Citrix Gateway Exam 1Y0-231 Exam Practice Test

Scenario: To meet the security requirements of the organization, a Citrix Administrator needs to configure a Citrix Gateway virtual server with time-outs for user sessions triggered by the behaviors below:Inactivity for at least 15 minutes.No keyboard or mouse activity for at least 15 minutesWhich set of time-out settings can the administrator configure to meet the requirements?

• Session time-out and client idle time-out set to 15
• Session time-out and forced time-out set to 15
• Client idle time-out and forced time-out set to 15
• Client idle time-out and forced time-out set to 900

Scenario: A Junior Citrix Administrator needs to create a content switching virtual server on a Citrix ADC high availability (HA) pair. The NSIP addresses are 192 168.20.10 and 192.168.20.11. The junior administrator connects to NSIP address 192.168.20.10 and saves the changes.The following day, a Senior Citrix Administrator tests the new content switching virtual server, but it is NOT working. The senior administrator connects to the HA pair and discovers that everything the junior administrator configured is NOT visible.Why has the Citrix ADC lost the newly added configurations?

• The junior administrator made the changes and did NOT force a failover to save the configurations.
• The junior administrator connected to the NSIP of the secondary Citrix ADC in the HA pair.
• The Citrix ADC appliances have different firmware versions.
• Both Citrix ADCs in the HA pair restarted overnight.

After being audited, a Citrix Administrator learns that additional security enhancements should be made to oneof the virtual servers.Which two actions can the administrator perform to accomplish this? (Choose two.)

• Enable the TLSv1.2.
• Enable the RC4 cipher suite.
• Create a SHA1 key.
• Disable the SSLv3.

A Citrix Administrator configured a load-balancing virtual server to utilize the least bandwidth load-balancing method. A service attached to this virtual server is brought into the effective state during production hours.During the startup of a virtual server, which load-balancing method is used by default?

• Round-robin
• Least connections
• Least bandwidth
• Custom load

A Citrix Administrator needs to integrate an existing certification-based authentication policy into an existingCitrix Gateway virtual server.Which three steps can the administrator take to accomplish this? (Choose three.)

• Bind the existing CERT authentication policy to the Citrix Gateway virtual server.
• Enable the two-factor option on the existing CERT authentication profile.
• Enable client authentication on the SSL parameters of the virtual server.
• Change the client certificate to mandatory on the SSL parameters of the virtual server.
• Create a CERT authentication policy and bind it to the Citrix Gateway virtual server.

While applying a new Citrix ADC device, a Citrix Administrator notices an issue with the time on the appliance.Which two steps can the administrator perform to automatically adjust the time? (Choose two.)

• Add an SNMP manager.
• Add an SNMP trap.
• Enable NTP synchronization.
• Add an NTP server.
• Configure an NTP monitor.

A Citrix Administrator needs to deploy a Citrix ADC between the servers and the client, with servers only allowed to reach the client through the Citrix ADC.In which mode should the administrator deploy the Citrix ADC?

• Inline
• Direct server return
• Transparent
• One-arm

Scenario: A Citrix Administrator deployed a Citrix ADC in one-arm mode. Currently, the VLANs 20, 30, and 40are tagged on the interface with the option of 'tagall'.What is true regarding the VLANs, when 'tagall' is enabled on the interface?

• VLANS 1, 20, 30, 40, and HA packets are tagged on the interface.
• VLANS 20, 30, and 40 are tagged on the interface.
• VLANS 1, 20, 30, and 40 are tagged on the interface.
• VLANS 20, 30, 40, and HA packets are tagged on the interface.

What does a Citrix Administrator need to configure to allow access to Citrix Virtual Apps and Desktops without the use of a VPN or a clientless-access connection?

• Ciphers group
• SSL profile
• Net profile
• ICA proxy

Where do the monitor probes originate by default, after creating and correctly configuring a custom user monitor?

• MIP
• SNIP
• VIP
• NSIP